Natural Sciences - Research article Open Access Logo

INFLUENCE OF THE ANNEALING TEMPERATURE ON STRUCTURE PROPERTIES AND PHOTOACTIVITY OF TITANIA COATING ON PHOSPHATE SURFACE

Linh Thi Truc Nguyen 1, *
Tri Huu Nguyen 1
Dzung Van Nguyen 2
  1. University of Science, VNU-HCM
  2. Institute of Applied Materials Science - VAST
Correspondence to: Linh Thi Truc Nguyen, University of Science, VNU-HCM. Email: pvphuc@hcmuns.edu.vn.
Volume & Issue: Vol. 13 No. 1 (2010) | Page No.: 10-16 | DOI: 10.32508/stdj.v13i1.2089
Published: 2010-03-30

Online metrics


Statistics from the website

  • Abstract Views: 3787
  • Galley Views: 1587

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

The titania coating on phosphate surface was made by the painting method in air and at room temperature. The coatings were dried at 25°c and sintered at 15(TC, 25(FC, 350”C, 45ƠJC, 550°C for 30 minutes. X-ray diffraction, scanning electron microscopy and the cutting method (TCVN 2097-1993) were used to characterize the coatings. The results showed that the coating annealed at 350TC had the high photoactivity in the photodegradation of methylene blue.

Comments