Open Access 
Downloads
Download data is not yet available.
Abstract
In this paper, we study the determination the path generation of the cutting tool In manufacturing the plane complicated profile. The direction of this paper is the research of the relative motion of cutting tool and detail in manufacturing complicated profile mechanical detail in the base of formal creation theory.
Author's Affiliation
Article Details
Issue: Vol 3 No 4 (2000)
Page No.: 46-50
Published: Apr 30, 2000
Section: Article
DOI: https://doi.org/10.32508/stdj.v3i4.3554
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Tuan Kiet, N., Khanh Dien, L., & Huy Hoang, P. (2000). DETERMINATION OF THE RELATIVE MOTION OF CUTTING TOOL IN MANUFACTURING THE GIVEN COMPLICATED PROFILE MECHANICAL DETAIL IN THE BASE OF FORMAL CREATION THEORY. VNUHCM Journal of Science and Technology Development, 3(4), 46-50. https://doi.org/https://doi.org/10.32508/stdj.v3i4.3554
Download Citation
Cited by
Article Statistics
HTML = 1292 times
Download PDF = 458 times
Total = 458 times
Download PDF = 458 times
Total = 458 times
Most read articles by the same author(s)
- Pham Huy Hoang, SOME METHODS FOR KINEMATICS ANALYSIS OF THE MANIPULATORS , VNUHCM Journal of Science and Technology Development: Vol 3 No 2 (2000)
- Pham Huy Hoang, Le Khanh Dien, Nguyen Tuan Kiet, DETERMINATION OF CAM PROFILE'S EQUATION , VNUHCM Journal of Science and Technology Development: Vol 3 No 4 (2000)
