Open Access

Downloads

Download data is not yet available.

Abstract

A simply and accurate analytical method was developed to determination the carbon content in silica-supported materials. The principle of this method was to oxidize sample by a strong oxidant like potassium dichromate to produce carbon dioxide and this gas is absorbed into an alkaline solution for subsequent titration. The repeatability and the recovery of this method fell into the required range (% RSD <1.3 % and 98-102 % in recovery) of AOAC International. The chloride content of up to 100 mg did not give any influence. The developed procedure was applied to determine the carbon content in octadecyl-modified silica samples.



Author's Affiliation
Article Details

Issue: Vol 19 No 4 (2016)
Page No.: 162-166
Published: Dec 31, 2016
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v19i4.632

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Nguyen, G., Hoang, U., Nguyen, M., Nguyen, D., & Nguyen, M. (2016). Simple procedure for determination of the carbon content in silica-supported materials. Science and Technology Development Journal, 19(4), 162-166. https://doi.org/https://doi.org/10.32508/stdj.v19i4.632

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1157 times
Download PDF   = 558 times
Total   = 558 times

Most read articles by the same author(s)