Open Access 
Downloads
Download data is not yet available.
Abstract
The conventional lockstitch sewing machine is equipped with an automatic thread trimmer and reverse stitching. The sewing process is monitored and managed by micro controller units. This upgrade improves quality, and increases productivity. These results solved the problem of “equipment modernization at low cost” in Garment factories.
Author's Affiliation
Article Details
Issue: Vol 7 No 2 (2004)
Page No.: 73-78
Published: Feb 29, 2004
Section: Article
DOI: https://doi.org/10.32508/stdj.v7i2.3167
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Tri, H. (2004). UPGRADING THE 1-NEEDLE LOCKSTITCH SEWING MACHINE WITH AN AUTOMATIC THREAD TRIMMER. VNUHCM Journal of Science and Technology Development, 7(2), 73-78. https://doi.org/https://doi.org/10.32508/stdj.v7i2.3167
Download Citation
Cited by
Article Statistics
HTML = 1448 times
Download PDF = 1058 times
Total = 1058 times
Download PDF = 1058 times
Total = 1058 times
