Open Access 
Downloads
Abstract
This article presents a method of the error reducing control in SLS machine. When using SLS machine, there are many factors that cause the errors such as: temperature, trajectory, velocity and laser intensity. Therefore, we need to have a precise method control in order to have an accurate processing sample. This one presents the Fuzzy Control Method to help we achieve highly accurate results when process with SLS machine. We propose control method that establishs the criteria based on many influence processing parameters previously mentioned (*) rather than merely control position, velocity, trajectory as the CNC machines. The processing by SLS machine basse on the control MIMO model. Therefore, estimating and parameterizing control parameters to reducing.
Issue: Vol 17 No 1 (2014)
Page No.: 36-42
Published: Mar 31, 2014
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v17i1.1292
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Download PDF = 650 times
Total = 650 times
Most read articles by the same author(s)
- Binh Thien Nguyen, Son Thanh Le, Nam Thanh Nguyen, Design of Roller mechanism and Conveyor in Sulfur granulation systems , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Dien Khanh Le, Nam Thanh Nguyen, Binh Thien Nguyen, A recommendation of computation of normal streeses in single point incremental forming technology , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Lam Huynh Phan, Nam Thanh Nguyen, Duy Van Pham, Binh Thien Nguyen, Son Thanh Le, Color separation Algorithm and Rice identification , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Lam Huynh Phan, Nam Thanh Nguyen, Duy Van Pham, Errors reducing method of Laser 3D scanner , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Anh Pham Huy Ho, Nam Thanh Nguyen, Dynamic model identification of IPMC actuator using fuzzy NARX model optimized by MPSO , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Anh Pham Huy Ho, Nam Thanh Nguyen, Identification of Mimo dynamic system using inverse Mimo Neural Narx model , Science and Technology Development Journal: Vol 16 No 2 (2013)
- Hung Van Le, Phu Huu Bui, Duy Thanh Nguyen, Nam Thanh Nguyen, APPLICATION OF THE PREDICTION DECONVOLUTION TECHNIQUE TO SIGNAL PROCESSING IN GROUND PENETRATING RADAR SYSTEMS , Science and Technology Development Journal: Vol 15 No 1 (2012)
- Lam Huynh Phan, Ha Thi Thu Thai, A SYSTEM FOR MONITORING AND CONTROL THE HYDROMETEOROLOGICAL PARAMETERS VIA GSM/GPRS/EGDE NETWORK , Science and Technology Development Journal: Vol 15 No 1 (2012)
- Trung Van Pham, Cuong Van Vo, Dien Khanh Le, Nang Van Nguyen, Tuan Dinh Phan, Nam Thanh Nguyen, DEFORMATION ABILITY OF SINGLE POINT INCREMENTAL FORMING FOR THEMO-PLASTIC COMPOSITE MATERIALS , Science and Technology Development Journal: Vol 14 No 2 (2011)
- Tuyen Vo, Nam Thanh Nguyen, RESEARCH ON NUMERICAL SIMULATION FOR VELOCITY DISTRIBUTION OF SWIRLING TURBULENT JETS IN SPRAY IRRIGATION TECHNOLOGY , Science and Technology Development Journal: Vol 13 No 2 (2010)
