Open Access 
Downloads
Download data is not yet available.
Abstract
This article presents an experimental study examining the effects of technological
parameters to the ISF process on PVC material such as : tool diameter d, tool step depth z, feed rate f
and forming temperature T, thereby the determining the limiting value of angular distortion αmax.
Author's Affiliation
Article Details
Issue: Vol 15 No 1 (2012)
Page No.: 5-14
Published: Mar 30, 2012
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v15i1.1769
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Nguyen, N., Nguyen, N., Le, D., Nguyen, B., & Nguyen, T. (2012). EXPERIMENTAL STUDY OF THE FORMING POSSIBILITY OF ISF PROCESS FOR PVC PLASTIC SHEET. Science and Technology Development Journal, 15(1), 5-14. https://doi.org/https://doi.org/10.32508/stdj.v15i1.1769
Download Citation
Cited by
Article Statistics
HTML = 1341 times
Download PDF = 606 times
Total = 606 times
Download PDF = 606 times
Total = 606 times
