Engineering and Technology - Research article Open Access Logo

OPTIMIZATION PARAMETERS OF IRRIGATION PROCESS ACCORDING TO THE UNIFORMITY

Tuyen Vo 1, *
Nam Thanh Nguyen 2
Lien Duc Hoang 3
  1. University of Food Industry HCM city
  2. DCSELAB, University of Technology
  3. Ha Noi University of Agriculture
Correspondence to: Tuyen Vo, University of Food Industry HCM city. Email: pvphuc@hcmuns.edu.vn.
Volume & Issue: Vol. 15 No. 1 (2012) | Page No.: 80-89 | DOI: 10.32508/stdj.v15i1.1778
Published: 2012-03-30

Online metrics


Statistics from the website

  • Abstract Views: 0
  • Galley Views: 0

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

In order to determine the optimal parameters of irrigation process in order to verify the accuracy of the numerical simulation results of experimental determination of the effective spray during irrigation [2], [6]. This paper will conduct empirical planning, establishing empirical mathematical model to determine the diameter of the nozzle, swirl coefficient and irrigation output according to the uniformity.

Comments