Open Access  

Downloads

Download data is not yet available.

Abstract

This article deals with optimal nesting problem when parts are cut from rectangular sheet in the footwear industry. The objective of the research is minimizing the waste of material or maximizing the number of parts to be cut from sheet materials. By generating the mathematical models and building up their algorithms, the software for solving problem dedicates to a number of industries for saving time and minimizing waste of material, and increasing the cutting productivity.

Author's Affiliation
Article Details

Issue: Vol 13 No 1 (2010)
Page No.: 39-48
Published: Mar 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i1.2068

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Tran, B., Pham, T., Tran, N., & Ho, T. (2010). OPTIMAL STRIP LAYOUT OF IRREGULAR SHAPES CUTTING FROM RECTANGULAR SHEET. Science and Technology Development Journal, 13(1), 39-48. https://doi.org/https://doi.org/10.32508/stdj.v13i1.2068


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1421 times
Download PDF   = 581 times
Total   = 581 times