Open Access

Downloads

Download data is not yet available.

Abstract

This paper proposes a structure and kinematics parameters of a fiber cutting machine, which is used to cut fibers (such as jute fiber, bamboo fiber, coconut fiber...) for composite materials. To come over this obstacle, dynamic and geometric parameters of cutting parts were calculated and studied, some fibers physico-mechanical properties and their effect in the quality of the composite materials were investigated.



Author's Affiliation
Article Details

Issue: Vol 13 No 2 (2010)
Page No.: 37-48
Published: Jun 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i2.2116

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Nguyen, N. (2010). FIBER CUTTING MACHINE USED FOR COMPOSIT MATERIAL. Science and Technology Development Journal, 13(2), 37-48. https://doi.org/https://doi.org/10.32508/stdj.v13i2.2116

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1124 times
Download PDF   = 558 times
Total   = 558 times