Open Access 
Downloads
Abstract
This article presents research results from the freeze drying regime for penaeus monodon based-on the solution of the multi-objective optimization problem. Experiments were carried out to determine the objective functions to describe influence of technological parametres (temperature and pressure of sublimation environment, times of freeze drying) during processing freeze drying. The multi-objective optimization problem was solved by Utopian point method with combination criteria s. The best technological regime for freeze drying was determined. At received freeze drying regime we have minimal energy expenditures, minimal contraction of product and minimal loss of vitamin c, humidity of material meet requirements from 2 to 6 percentage and maximal absorbent return of product.
Issue: Vol 13 No 2 (2010)
Page No.: 59-71
Published: Jun 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i2.2118
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Download PDF = 582 times
Total = 582 times
Most read articles by the same author(s)
- Dzung Tan Nguyen, Dzung Van Trinh, Ba Duc Tran, BUIDING MATHEMATICAL MODEL OF FREEZING HEAT TRANSFER TO DETERMINE ICE RATIO AND OPTIMAL FREEZING TEMPERATURE OF HUMID MATERIALS IN THE FIRST STAGE IN CONDITION OF FREEZE DRYING , Science and Technology Development Journal: Vol 13 No 4 (2010)
