Open Access  

Downloads

Download data is not yet available.

Abstract

This article introduces research results on optimization of oriented nesting layout for pieces of irregular shapes to be cut in rectangular material sheets in order that number of cut pieces is maximized or material waste is minimized. The optimized alternative is selected when material utilization coefficient is maximized with the requirement on strain, texture, fiber orientation of material sheet. This solution may be applied in some industries using sheet material and having requirement on orientation when cutting.

Author's Affiliation
Article Details

Issue: Vol 13 No 3 (2010)
Page No.: 43-50
Published: Sep 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i3.2133

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Tran, B., & Pham, T. (2010). OPTIMIZATION OF ORIENTED NESTING LAYOUT ON RECTANGULAR MATERIAL SHEETS. Science and Technology Development Journal, 13(3), 43-50. https://doi.org/https://doi.org/10.32508/stdj.v13i3.2133


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1222 times
Download PDF   = 634 times
Total   = 634 times