Open Access 
Downloads
Download data is not yet available.
Abstract
Predicting crack trajectory when crack propagation occurs plays an important role in fracture mechanics problems because this will evaluate whether important areas of structure are heavily influenced by crack propagation. This article will introduce three theories to predict crack path, including maximum tangential stress theory, maximum energy release rate theory and minimum strain energy density theory. Besides, the FRANC2D program is used to simulate the crack propagation based on three above theories.
Author's Affiliation
Article Details
Issue: Vol 13 No 4 (2010)
Page No.: 40-50
Published: Dec 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i4.2167
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Truong, T., & Tran, B. (2010). SIMULATION OF CRACK PROPAGATION IN TWO DIMENSIONAL PROBLEMS. Science and Technology Development Journal, 13(4), 40-50. https://doi.org/https://doi.org/10.32508/stdj.v13i4.2167
Download Citation
Cited by
Article Statistics
HTML = 702 times
Download PDF = 612 times
Total = 612 times
Download PDF = 612 times
Total = 612 times
Most read articles by the same author(s)
- Thien Tich Truong, Bang Kim Tran, APPLICATION OF QUARTER-POINT SINGULAR ELEMENT IN FINITE ELEMENT METHOD TO SIMULATION OF CRACK TIP BEHAVIOR , Science and Technology Development Journal: Vol 13 No 2 (2010)
