Open Access 
Downloads
Download data is not yet available.
Abstract
The paper presents an application the research results previously done by group on the influence of technological parameters to the deformation angle and finish surface quality in order to choose technology parameters for the incremental sheet forming (ISF) process to produce products for the purpose of rapid prototyping or single-batch production, including all steps from design and process 3D CAD model, calculate and select the technological parameters, setting up manufacturing and the stage of post-processing. The samples formed successfully showed high applicability of this technology to practical work, the complex products with the real size can be produced in industries: automotive, motorcycle, civil...
Author's Affiliation
Article Details
Issue: Vol 13 No 4 (2010)
Page No.: 91-98
Published: Dec 30, 2010
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v13i4.2181
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Phan, T., Nguyen, B., Le, D., & Pham, P. (2010). APPLYING THE ISF TECHNOLOGY TO PRODUCE THE CAR PART MODELS. Science and Technology Development Journal, 13(4), 91-98. https://doi.org/https://doi.org/10.32508/stdj.v13i4.2181
Download Citation
Cited by
Article Statistics
HTML = 1231 times
Download PDF = 458 times
Total = 458 times
Download PDF = 458 times
Total = 458 times
Most read articles by the same author(s)
- Binh Thien Nguyen, Son Thanh Le, Nam Thanh Nguyen, Design of Roller mechanism and Conveyor in Sulfur granulation systems , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Dien Khanh Le, Nam Thanh Nguyen, Binh Thien Nguyen, A recommendation of computation of normal streeses in single point incremental forming technology , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Lam Huynh Phan, Nam Thanh Nguyen, Duy Van Pham, Binh Thien Nguyen, Son Thanh Le, Color separation Algorithm and Rice identification , Science and Technology Development Journal: Vol 17 No 1 (2014)
- Trung Van Pham, Cuong Van Vo, Dien Khanh Le, Nang Van Nguyen, Tuan Dinh Phan, Nam Thanh Nguyen, DEFORMATION ABILITY OF SINGLE POINT INCREMENTAL FORMING FOR THEMO-PLASTIC COMPOSITE MATERIALS , Science and Technology Development Journal: Vol 14 No 2 (2011)
- Tuan Dinh Phan, Binh Thien Nguyen, Dien Khanh Le, Phuong Hoang Pham, APPLYING THE ISF TECHNOLOGY TO PRODUCE THE CAR PART MODELS , Science and Technology Development Journal: Vol 14 No 2 (2011)
- Tuan Dinh Phan, Nam Thanh Nguyen, Binh Thien Nguyen, A DESIGN OF SPECIALIZED SHEET FORMING MACHINE BY ISF TECHNOLOGY , Science and Technology Development Journal: Vol 13 No 4 (2010)
