Open Access 
Downloads
Download data is not yet available.
Abstract
This paper attempts to represent a case of calculating of the energy power that is consumed by CNC milling machine when manufacturing via forming membrane metal sheet by SPIF (Single Point Incremental Forming), the recent manufacturing process of metal sheet forming by drafting a no cutting-edge spheric tip tool on a clamped metal sheet. The calculation is based on the disclocation, the crystal plasticity and the slip of lattices inside the structure of the deformed metal. In the while time there is a series of empirical species of 24 groups batch of workpieces that were also machined by CNC milling machine Bridge Port VMC500, CAD/CAM Lab., FME of HCMUT for checking this calculation on consumed power.
Author's Affiliation
Article Details
Issue: Vol 12 No 4 (2009)
Page No.: 5-17
Published: Feb 28, 2009
Section: Article
DOI: https://doi.org/10.32508/stdj.v12i4.2227
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Nguyen, N., Le, D., & Le, S. (2009). A CALCULATION OF POWER FOR FORMING METAL SHEET BY SPIF PROCESS. Science and Technology Development Journal, 12(4), 5-17. https://doi.org/https://doi.org/10.32508/stdj.v12i4.2227
Download Citation
Cited by
Article Statistics
HTML = 1597 times
Download PDF = 532 times
Total = 532 times
Download PDF = 532 times
Total = 532 times
Most read articles by the same author(s)
- Nam Thanh Nguyen, Tuan Dinh Phan, Cuong Van Vo, Dien Khanh Le, Binh Thien Nguyen, Hieu Trung Le, RESEARCH ON THE FORMING ANGLE OF A1050-H14 ALUMINUM MATERIAL PROCESSED BY USING SINGLE POINT INCREMENTAL FORMING TECHNOLOGY (SPIF) , Science and Technology Development Journal: Vol 12 No 16 (2009)
