Viet Nam National University Ho Chi Minh City Logo

VNUHCM Journal of

Science and Technology Development

An official journal of Viet Nam National University Ho Chi Minh City, Viet Nam since 1997

ISSN: 1859-0128
Register Login
Article Open Access Logo

MAKE THE MEDICAL IMPLANTS BY USING MOLDS MANUFACTURED ON THE CNC MILLING MACHINE

Binh Quang Le 1, *
Nghin Van Dang 1
Nguyen Dai Tran 1
Nghi Huu Huynh 1
Quoc Anh Bui 1

  1. University of Technology, VN-HCM
Correspondence to: Binh Quang Le, University of Technology, VN-HCM. Email: pvphuc@hcmuns.edu.vn.
Volume & Issue: Vol. 12 No. 4 (2009) | Page No.: 55-60 | DOI: 10.32508/stdj.v12i4.2232
Published: 2009-02-28

Online metrics

Statistics from the website

  • Abstract Views: 56074
  • Galley Views: 1125

Statistics from Dimensions

Statistics from PlumX
Copyright © 2009 by the author(s).

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

The medical implants are most used to intensify beauty and fail-safety for the patients. In the former medical implant were made by operator's hands so the modeling of piece depends on the skills of the operators. This papper presents a method to make the medical implant by using molds manufactured on the CNC milling machine.

Comments