Open Access 
Downloads
Download data is not yet available.
Abstract
The paper introduces guidelines for implementing design for maintainability with the objective to have products to be maintained easily and favorably with minimum downtime and life cycle cost.
Author's Affiliation
Article Details
Issue: Vol 12 No 5 (2009)
Page No.: 14-24
Published: Mar 15, 2009
Section: Article
DOI: https://doi.org/10.32508/stdj.v12i5.2240
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Tran, H., Tran, N., & Pham, T. (2009). DESIGN FOR MAINTAINABILITY - DFM. Science and Technology Development Journal, 12(5), 14-24. https://doi.org/https://doi.org/10.32508/stdj.v12i5.2240
Download Citation
Cited by
Article Statistics
HTML = 1073 times
Download PDF = 643 times
Total = 643 times
Download PDF = 643 times
Total = 643 times
Most read articles by the same author(s)
- Bong Dang Tran, Tuan Ngoc Pham, OPTIMIZATION OF ORIENTED NESTING LAYOUT ON RECTANGULAR MATERIAL SHEETS , Science and Technology Development Journal: Vol 13 No 3 (2010)
- Bong Dang Tran, Tuan Ngoc Pham, Nguyen Dai Tran, Tuan Minh Ho, GODOGRAPH OF STRIP LAYOUT OF IRREGULAR SHAPES CUTTING FROM SHEET , Science and Technology Development Journal: Vol 12 No 13 (2009)
