Viet Nam National University Ho Chi Minh City Logo

VNUHCM Journal of

Science and Technology Development

An official journal of Viet Nam National University Ho Chi Minh City, Viet Nam since 1997

ISSN: 1859-0128
Register Login
Article Open Access Logo

SELECTING A PROPER TECHNOLOGICAL PROCESS USING REVERSE SYSTEM DRILLING METHOD FOR GROUNDWATER EXPLOITATION IN SOUTHERN VIETNAM

Chung Van Tran 1, *

  1. Division of Hydrogeology and Engineering Geology for the South
Correspondence to: Chung Van Tran, Division of Hydrogeology and Engineering Geology for the South. Email: pvphuc@hcmuns.edu.vn.
Volume & Issue: Vol. 12 No. 6 (2009) | Page No.: 73-83 | DOI: 10.32508/stdj.v12i6.2256
Published: 2009-03-28

Online metrics

Statistics from the website

  • Abstract Views: 5316
  • Galley Views: 1699

Statistics from Dimensions

Statistics from PlumX
Copyright © 2009 by the author(s).

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

Reverse circulation drilling is one of the most effective drilling method on drilling of high capacity water supply wells in soft sedimentary aquifer. Technological process of reverse system are: - Counter flush drilling system - Suction drilling system. - Suction jet drilling system - Air-lift drilling system Based on drilling theory and reality of applying of RC drilling method, all the RC drilling systems will be analyzed for choosing the suitable system for Nambo area.

Comments