Open Access

Downloads

Download data is not yet available.

Abstract

Recently, OFDM technique has been applied to many digital communications systems such as DVB-T, WiFi, WiMAX and MIMO systems. OFDM can send multiple high speed signals by using orthogonal carrier frequencies. In addition, OFDM technique can combat inter-symbol interference (ISI) and inter-channel interference (ICI). Therefore, OFL has been an essential technology in high-speed communications. The aim of this project is to implement the base-band OFDM system on hardware exploiting FPGA-based DSP Development Kit and DSPBuilder® software from Altera®. The results can be used for training purpose and for a further development of OFDM-based communication systems.



Author's Affiliation
Article Details

Issue: Vol 12 No 12 (2009)
Page No.: 73-85
Published: Jun 28, 2009
Section: Article
DOI: https://doi.org/10.32508/stdj.v12i12.2322

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Dang, K., Nguyen, A., Bui, P., & Nguyen, P. (2009). IMPLEMENTING AN OFDM SYSTEM ON HARDWARE. Science and Technology Development Journal, 12(12), 73-85. https://doi.org/https://doi.org/10.32508/stdj.v12i12.2322

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1258 times
Download PDF   = 784 times
Total   = 784 times