THE AUTOMATICAL DRAWING AND BUILDING MODEL OF PROPELLER FROM DESIGNING PARAMETERS IN CAD/CAM PROGRAMS

Thai Gia Tran

doi:10.32508/stdj.v12i14.2338

Article
Details
Citation
Metrics

Open Access

Downloads

Download data is not yet available.

Abstract

This article is the first one in several papers concerning the problem in processing propeller by CNC miller in multipurpose mold. This article is presented the approach, the algorithm and the program of automatical drawing and building model propeller from designing parameters in CAD/CAM progams - this is the first step in manufacturing process by CNC miller.

Comments

Author's Affiliation

Thai Gia Tran

Nha Trang University
Google Scholar Pubmed

Article Details

Issue: Vol 12 No 14 (2009)

Page No.: 37-46

Published: Aug 15, 2009

Section: Article

DOI: https://doi.org/10.32508/stdj.v12i14.2338

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

How to Cite

Tran, T. (2009). THE AUTOMATICAL DRAWING AND BUILDING MODEL OF PROPELLER FROM DESIGNING PARAMETERS IN CAD/CAM PROGRAMS. Science and Technology Development Journal, 12(14), 37-46. https://doi.org/https://doi.org/10.32508/stdj.v12i14.2338