Open Access 
Downloads
Download data is not yet available.
Abstract
This paper presents research results on improvement of grading process in the footwear industry, a new grading software which is suitable to manufacturing practices, can reduce deviation and increase productivity in the grading process in comparison with the manual method.
Author's Affiliation
Article Details
Issue: Vol 12 No 16 (2009)
Page No.: 92-101
Published: Oct 15, 2009
Section: Article
DOI: https://doi.org/10.32508/stdj.v12i16.2359
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Pham, T., Ho, T., Tran, H., & Tran, B. (2009). RESEARCH AND DEVELOPMENT OF A NEW GRADING SOFTWARE IN FOOTWEAR INDUSTRY. Journal of Science and Technology Development, 12(16), 92-101. https://doi.org/https://doi.org/10.32508/stdj.v12i16.2359
Download Citation
Cited by
Article Statistics
HTML = 1789 times
Download PDF = 831 times
Total = 831 times
Download PDF = 831 times
Total = 831 times
Most read articles by the same author(s)
- Bong Dang Tran, Tuan Ngoc Pham, Nguyen Dai Tran, Tuan Minh Ho, OPTIMAL STRIP LAYOUT OF IRREGULAR SHAPES CUTTING FROM RECTANGULAR SHEET , Journal of Science and Technology Development: Vol 13 No 1 (2010)
- Bong Dang Tran, Tuan Ngoc Pham, OPTIMIZATION OF ORIENTED NESTING LAYOUT ON RECTANGULAR MATERIAL SHEETS , Journal of Science and Technology Development: Vol 13 No 3 (2010)
- Hien Dang Tran, Nguyen Dai Tran, Tuan Ngoc Pham, DESIGN FOR RELIABILITY , Journal of Science and Technology Development: Vol 12 No 8 (2009)
