Open Access

Downloads

Download data is not yet available.

Abstract

Research focuses on the printing technology of the cotton 100% fibers by the reactive dyes in the condition of microwave. In this research, we studied the effects of the microwave method in the steam-color and compared with the normal method, searching optimal formulae out which obtained the high economical results, the products of good quality, the amount of used chemicals, dye-stuffs, steam-color time are decreased, reducing environment pollutions.



Author's Affiliation
Article Details

Issue: Vol 11 No 8 (2008)
Page No.: 69-76
Published: Aug 31, 2008
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v11i8.2676

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Thanh Quan, P., & Hong Phuong, P. (2008). INVESTIGATION ON THE PRINTING TECHNOLOGY OF THE COTTON 100% FIBERS BY THE MICROWAVE METHOD. Science and Technology Development Journal, 11(8), 69-76. https://doi.org/https://doi.org/10.32508/stdj.v11i8.2676

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1088 times
Download PDF   = 296 times
Total   = 296 times