Open Access 
Downloads
Download data is not yet available.
Abstract
This paper describes operational principle and performance of sensor's KIT, including strain gauge, various types of temperature sensors, optic sensors, Hall sensor, which can be connected to NI DAQ PCI 6024E. There are two modes of operation of KIT: manual and automatics. In the manual mode, outputs of the KIT can be measured by milivolmeter based on ICL7107. In the automatic mode, outputs of the KIT can be connected to NI DAQ PCI 6024E.
Author's Affiliation
Article Details
Issue: Vol 8 No 1 (2005)
Page No.: 34-39
Published: Jan 31, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i1.2954
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Sy Hien, D., Phuc, L., & Dung, L. (2005). DESIGN AND CONSTRUCTION OF SENSOR’S KIT LINKED TO NI DAQ PCI 6024E. VNUHCM Journal of Science and Technology Development, 8(1), 34-39. https://doi.org/https://doi.org/10.32508/stdj.v8i1.2954
Download Citation
Cited by
Article Statistics
HTML = 1739 times
Download PDF = 542 times
Total = 542 times
Download PDF = 542 times
Total = 542 times
Most read articles by the same author(s)
- Le Duc Hung, Nguyen Thi Ngoc Lan, Dinh Sy Hien, Le Huu Phuc, DEVELOPMENT OF SPECTRUM ANALYZER BASED ON LABVIEW 7.1 AND DIGITAL OSCILLOSCOPE TDS1012 , VNUHCM Journal of Science and Technology Development: Vol 8 No 12 (2005)
