Open Access  

Downloads

Download data is not yet available.

Abstract

This paper presents a mini crane used for handling 3D concrete – prefabricated components. All travelling, revolving cranes should be designed for stability ensuring their safe operation without any hazard. Some results about the relationship of the loud and the reach decided by crane stability also represent in the form of the chart by means of which one cun assess the safe load depending on the reach. In some construction site, our cranes have been working safely, reliably and ensuring stability.

Author's Affiliation
Article Details

Issue: Vol 8 No 2 (2005)
Page No.: 25-30
Published: Feb 28, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i2.2966

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Hong Ngan, N., & Minh Dao, H. (2005). DESIGN, MANUFACTURE CHEAP CRANE USED FOR BUILDING HOUSE MADE BY PREFABRICATED BUILDING COMPONENT. Science and Technology Development Journal, 8(2), 25-30. https://doi.org/https://doi.org/10.32508/stdj.v8i2.2966


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 951 times
Download PDF   = 414 times
Total   = 414 times

Most read articles by the same author(s)