Open Access  

Downloads

Download data is not yet available.

Abstract

This paper presents the CAD/CAE Method for determining an appropriate layout of cooling chanells in injection molds. In the proposed method, 5 principles governing cooling solution choices are utilized for Cooling Method Selection, Cooling Chanells Diameter Determination, Cooling Chanells Layout, and Cooling Conditions Determination; the functions Fill+Cool+Flow+Warp of Moldflow software package are utilized for cooling calculation; and proposed Cool and Warp Analysis Variables are utilized for cooling solutions evaluation. Also, the results of implementing the CAD/CAE method for the injection mold of water heating equipment cover are presented.

Author's Affiliation
Article Details

Issue: Vol 8 No 4 (2005)
Page No.: 59-65
Published: Apr 30, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i4.2991

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Minh Trinh, D., Minh Giac, C., & Van Thanh, N. (2005). CAD/CAE METHOD FOR DETERMINING AN APPROPRIATE LAYOUT OF COOLING CHANELLS IN INJECTION MOLDS. Science and Technology Development Journal, 8(4), 59-65. https://doi.org/https://doi.org/10.32508/stdj.v8i4.2991


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 874 times
Download PDF   = 310 times
Total   = 310 times