Open Access 
Downloads
Download data is not yet available.
Abstract
This paper presents the CAD/CAE Method for optimizing runners diameter of multi-cavity molds with unbalanced runners layout. In the proposed method, the Modified Stevence Formula is utilized for preliminary runners diameter determination; the funtion Runner Balance of Moldflow software package is utilized for runners balance calculation; and proposed Flow Analysis Variables are utilized for gates and runners evaluation. Also, the results of implementing the CAD/CAE method for the injection mold of screwed sockets are presented.
Author's Affiliation
Article Details
Issue: Vol 8 No 3 (2005)
Page No.: 67-73
Published: Mar 31, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i3.2997
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Minh Trinh, D., Phi Lan, D., & Quang Binh, L. (2005). CAD/CAE METHOD FOR OPTIMIZING RUNNERS DIAMETER OF MULTI-CAVITY MOLDS WITH UNBALANCED RUNNERS LAYOUT. Science and Technology Development Journal, 8(3), 67-73. https://doi.org/https://doi.org/10.32508/stdj.v8i3.2997
Download Citation
Cited by
Article Statistics
HTML = 866 times
Download PDF = 461 times
Total = 461 times
Download PDF = 461 times
Total = 461 times
Most read articles by the same author(s)
- Doan Thi Minh Trinh, Duong Vo Nhi Anh, APPLICATION OF THE CUBIC NURBS INTERPOLATION FOR FAIRING OF HIGH SPEED MACHINING TOOLPATH , Science and Technology Development Journal: Vol 9 No 7 (2006)
- Doan Thi Minh Trinh, Vu Hong Thuy, Le Quang Binh, APPLICATION OF CAD/CAE METHOD FOR OPTIMIZING RUNNERS DIAMETER OF 16 - PEN CUP CAVITY MOLD , Science and Technology Development Journal: Vol 9 No 8 (2006)
