Open Access 
Downloads
Download data is not yet available.
Abstract
The paper introduces results on studying and implementing the suggested design process of shoe last from received 3D digitized data. These data are read, refined and converted from .gws file to .pts file., exported to Pro/Engineer software, then NURBS curves and surfaces are designed, primarily detected faults, analyzed and evaluated errors to improve last design. Results may be fundamentals to develop other studies mentioned in the conclusion of the paper.
Author's Affiliation
Article Details
Issue: Vol 8 No 6 (2005)
Page No.: 48-57
Published: Jun 30, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i6.3005
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Ngoc Tuan, P. (2005). STUDY ON DESIGN OF SHOE LAST FROM 3D DIGITIZED DATA. Science and Technology Development Journal, 8(6), 48-57. https://doi.org/https://doi.org/10.32508/stdj.v8i6.3005
Download Citation
Cited by
Article Statistics
HTML = 533 times
Download PDF = 256 times
Total = 256 times
Download PDF = 256 times
Total = 256 times
Most read articles by the same author(s)
- Pham Ngoc Tuan, STUDY ON 3D DIGITIZING OF THE SHOE LAST , Science and Technology Development Journal: Vol 8 No 6 (2005)
