Open Access 
Abstract
The paper introduces results in studying and implementing the suggested 3D digitizing process of the shoe last. This is the first stage of the application procedure of reverse engineering for last design, size grading and machining. The suggested process and gathered experience in this study can be applied for digitizing of other 3D products with some necessary adjustment.
Author's Affiliation
-
Pham Ngoc Tuan
Faculty of Machanics, Ho Chi Minh City University of Technology-VNU-HCMC
Article Details
Issue: Vol 8 No 6 (2005)
Page No.: 40-47
Published: Jun 30, 2005
Section: Article
DOI: https://doi.org/10.32508/stdj.v8i6.3006
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Download Citation
