THE PROCESSING OF DISALIGNMENT MEASUREMENTS BY USING GEODETIC NETWORK ADJUSTMENT PROGRAM

Dao Xuan Loc

doi:10.32508/stdj.v7i2.3166

Article
Details
Citation
Metrics

Open Access

Downloads

Download data is not yet available.

Abstract

This paper presents basic theory to process disalignment measurements by using geodetic network adjustment program. For two modeling examples, the results from this method have small deviation compared with well-know formulae. This deviation is acceptable since it is smaller than one-sigma of disalignment.

Comments

Author's Affiliation

Dao Xuan Loc

Research and Application Center for Construction Technology, University of Technology - VNU-HCM
Google Scholar Pubmed

Article Details

Issue: Vol 7 No 2 (2004)

Page No.: 65-72

Published: Feb 29, 2004

Section: Article

DOI: https://doi.org/10.32508/stdj.v7i2.3166

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

How to Cite

Xuan Loc, D. (2004). THE PROCESSING OF DISALIGNMENT MEASUREMENTS BY USING GEODETIC NETWORK ADJUSTMENT PROGRAM. Science and Technology Development Journal, 7(2), 65-72. https://doi.org/https://doi.org/10.32508/stdj.v7i2.3166