Open Access 
Downloads
Download data is not yet available.
Abstract
In this paper we describe a thermoluminescence 3D equipment developed in our laboratory which can automatically measure and display a 3D graph, i.e the dependence of the intensity I of the thermoluminescence signal on the sample temperature T and the wavelength 1 of the emitted signal simultaneously. The temperature range varies linearly from chamber temperature to 400°C and the wavelength range is 350-600 nm, which is matched with the frequency response of the used photomultiplier tube. The equipment works automatically and after about 8 minutes the 3D graph will be displayed. With this equipment one can get basic informations in thermoluminescence studying.
Author's Affiliation
Article Details
Issue: Vol 7 No 4&5 (2004)
Page No.: 27-32
Published: May 31, 2004
Section: Article
DOI: https://doi.org/10.32508/stdj.v7i4&5.3192
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Nghia, T., Trung, T., & Thu, H. (2004). THERMOLUMINESCENCE 3D EQUIPMENT. Science and Technology Development Journal, 7(4&5), 27-32. https://doi.org/https://doi.org/10.32508/stdj.v7i4&5.3192
Download Citation
Cited by
Article Statistics
HTML = 630 times
Download PDF = 389 times
Total = 389 times
Download PDF = 389 times
Total = 389 times
