Open Access 
Downloads
Download data is not yet available.
Abstract
This paper presents a method for calculating deformation parameters: offset vectors, compression, extension, rotation and dilatation. This method is applied to a - computer program which processes data in angle-distance repeated measurement grids and quality control. The program can be used for analysing crustal displacements or engineering deformations such as hydro-power plants.
Author's Affiliation
Article Details
Issue: Vol 7 No 4&5 (2004)
Page No.: 121-127
Published: May 31, 2004
Section: Article
DOI: https://doi.org/10.32508/stdj.v7i4&5.3205
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Xuan Loc, D. (2004). ROCESSING DATA IN ANGLE- DISTANCE REPEATED MEASUREMENT TO DEFINE DEFORMATION PARAMETERS. VNUHCM Journal of Science and Technology Development, 7(4&5), 121-127. https://doi.org/https://doi.org/10.32508/stdj.v7i4&5.3205
Download Citation
Cited by
Article Statistics
HTML = 1148 times
Download PDF = 423 times
Total = 423 times
Download PDF = 423 times
Total = 423 times
