Open Access 
Downloads
Download data is not yet available.
Abstract
Thresher mechanism tangencial of Combine Harvester has to hav straw walker because there are 30% grains flying out with straws when threshing. Studying thresher mechnism of Vietnamese type Tangencial-Axial flow and Axial flow with flatbar pegpaddle bar to design and manufacture Rice Combine Havester (RCH), it no straw walker need to reduce the weight of RCH.
Author's Affiliation
Article Details
Issue: Vol 7 No 4&5 (2004)
Page No.: 146-150
Published: May 31, 2004
Section: Article
DOI: https://doi.org/10.32508/stdj.v7i4&5.3208
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Loc, N. (2004). STUDY AXIAL FLOW THRESHER WITH FLATBAR PEGPADDLE BAR TO DESIGN AND MANUFACTURE RICE COMBINER HARVESTER (RCH). VNUHCM Journal of Science and Technology Development, 7(4&5), 146-150. https://doi.org/https://doi.org/10.32508/stdj.v7i4&5.3208
Download Citation
Cited by
Article Statistics
HTML = 1335 times
Download PDF = 600 times
Total = 600 times
Download PDF = 600 times
Total = 600 times
Most read articles by the same author(s)
- Nguyen Quang Loc, STUDYING, DESIGNING, MANUFACTURING, TRANMISSION SYSTEM OF HALF CRAWLER OF RICE COMBINE HARVESTER (RCH) , VNUHCM Journal of Science and Technology Development: Vol 7 No 4&5 (2004)
