Open Access 
Downloads
Download data is not yet available.
Abstract
There are 5 problems when Designing and Fabricating Rice Combine Harvester(RCH), in which is Designing and Fabricating tranmission system for Rice Combine Harvester. Combine Harvester with tire type can not moving in the soft soil. Designing and Fabricating half crawler tranmission system of Rice combine Harvesting to increase able moving RCH on the soft soil.
Author's Affiliation
Article Details
Issue: Vol 7 No 4&5 (2004)
Page No.: 151-157
Published: May 31, 2004
Section: Article
DOI: https://doi.org/10.32508/stdj.v7i4&5.3209
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Loc, N. (2004). STUDYING, DESIGNING, MANUFACTURING, TRANMISSION SYSTEM OF HALF CRAWLER OF RICE COMBINE HARVESTER (RCH). VNUHCM Journal of Science and Technology Development, 7(4&5), 151-157. https://doi.org/https://doi.org/10.32508/stdj.v7i4&5.3209
Download Citation
Cited by
Article Statistics
HTML = 1073 times
Download PDF = 466 times
Total = 466 times
Download PDF = 466 times
Total = 466 times
Most read articles by the same author(s)
- Nguyen Quang Loc, STUDY AXIAL FLOW THRESHER WITH FLATBAR PEGPADDLE BAR TO DESIGN AND MANUFACTURE RICE COMBINER HARVESTER (RCH) , VNUHCM Journal of Science and Technology Development: Vol 7 No 4&5 (2004)
