Open Access 
Abstract
The Nodal analysis approach is a very flexible and simple method. It is set up and developed from the fluid mechanics equations using to solve optimal problems and design suitable parameters to related industry production systems. Once procedures are presented to analyze each component separately, the Nodal Analysis approach will be applied to analyze all system. In petroleum industry, the Nodal Analysis approach can be used to improve performance of production systems, optimize production parameters such as tubing size, flow rate, pressure, well completed parameters...To be able to optimize production system, we must optimize all possible production parameters. However, this paper only performs applying the Nodal Analysis approach to calculate optimum tubing diameter.
-
Nguyen Kien Cuong
Faculty of Geology and Petroleum, University of Technology - VNU-HCM -
Le Phuoc Hao
Faculty of Geology and Petroleum, University of Technology - VNU-HCM -
Trinh Huu Tuan
Faculty of Geology and Petroleum, University of Technology - VNU-HCM -
Do Quang Khanh
Faculty of Geology and Petroleum, University of Technology - VNU-HCM
Issue: Vol 6 No 11 (2003)
Page No.: 84-90
Published: Nov 30, 2003
Section: Article
DOI: https://doi.org/10.32508/stdj.v6i11.3381
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
