Viet Nam National University Ho Chi Minh City Logo

VNUHCM Journal of

Science and Technology Development

An official journal of Viet Nam National University Ho Chi Minh City, Viet Nam since 1997

ISSN: 1859-0128
Register Login
Article Open Access Logo

KINEMATICS OF FORMATION OF SPATIAL PROFILE IN MACHINING

Le Khanh Dien 1

Volume & Issue: Vol. 5 No. 3&4 (2002) | Page No.: 78-86 | DOI: 10.32508/stdj.v5i3&4.3419
Published: 2002-04-30

Online metrics

Statistics from the website

  • Abstract Views: 1841
  • Galley Views: 553

Statistics from Dimensions

Statistics from PlumX
Copyright © 2002 by the author(s).

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

This paper presents some essential elements in manufacturing the general complicated profile of metal workpiece when machining by spherule end milling cutting tool as: - Determination of coordinate of center point of spherule end milling cutting tool when machining a general given profile. - Determination of suitable radius of cutting tool.

Comments