Open Access  

Downloads

Download data is not yet available.

Abstract

This paper investigates the vibration of spheral end milling cutting tool in machining of continuous systems -system of infinite degrees of freedom to specify natural frequency, the eigen value for performing the quality of machined surface.

Author's Affiliation
Article Details

Issue: Vol 5 No 7&8 (2002)
Page No.: 86-95
Published: Aug 31, 2002
Section: Article
DOI: https://doi.org/10.32508/stdj.v5i7&8.3434

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Tuan Kiet, N., & Khanh Dien, L. (2002). INVESTIGATION OF VIBRATION OF SPHERAL END MILLING CUTTING TOOL IN MACHINING. VNUHCM Journal of Science and Technology Development, 5(7&8), 86-95. https://doi.org/https://doi.org/10.32508/stdj.v5i7&8.3434


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1219 times
Download PDF   = 428 times
Total   = 428 times