Open Access 
Downloads
Abstract
This article introduces to a program for calculation of resistance of high-speed crafts, and then rapidly chooses main power engines in ship design process. Basing on the Savitsky’s calculating models, since 70’s years, this procedure is applicable to high-speed and planing hull crafts which have big values of Froude number. Using published experimental results of Naval testing laboratories this procedure calculates the resistance from a few of principle hull parameters of the ship, and builds the graphs of resistance in other conditions of operation. This Program is one of parts of the Cooperative-Project for R&D in Applying of High Speed Light Craft’s Technology between the Department of Naval Architecture & Marine Engineering at HCMUT with others companies and institutions.
Issue: Vol 4 No 5&6 (2001)
Page No.: 5-12
Published: Jun 30, 2001
Section: Article
DOI: https://doi.org/10.32508/stdj.v4i5&6.3489
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Download PDF = 690 times
Total = 690 times
Most read articles by the same author(s)
- Vo Trong Cang, Tran Van Tao, GEOMETRICAL DESIGN OF SHIPS , Science and Technology Development Journal: Vol 4 No 5&6 (2001)
- Vo Trong Cang, Hoang Huu Chung, Doan Minh Thien, Le Hoang Chan, COMPUTERIZATION IN DESIGN OF SHIP POWER INSTALLATION , Science and Technology Development Journal: Vol 4 No 5&6 (2001)
- Vo Trong Cang, Tran Van Tao, CONSTRUCTION DESIGN OF SHIPS , Science and Technology Development Journal: Vol 4 No 8&9 (2001)
