Article Open Access Logo

RESEARCHING SOFTWARE OF DESIGN PROCESSOR FOR HELPING MAKE UP MODE OF CLOTH

Tran Thanh Trai 1
Dao The Long 1
Vo Nguyen An Binh 1
Bao Chuong 1
Volume & Issue: Vol. 4 No. 5&6 (2001) | Page No.: 75-85 | DOI: 10.32508/stdj.v4i5&6.3500
Published: 2001-06-30

Online metrics


Statistics from the website

  • Abstract Views: 1407
  • Galley Views: 624

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

Formerly, weaving jacquard technique has been appearing in Viet Nam, but it is not much improved in process design and industry as yet (still using hole carton). Though it has been helping by Vietnamese and foreign design software but this software is still limit about design and their output only use control of card-punch for making holing chain-carton.

Comments