Open Access 
Downloads
Download data is not yet available.
Abstract
Cam manufacturing by CNC needs the profile equation. In this paper, we study the determination of this equation, basing on the assumption method (fixed link change method : assuming that the cam remains stationary while the fixed link rotates about the cam in the opposite direction) and the envelope theory.
Author's Affiliation
Article Details
Issue: Vol 3 No 4 (2000)
Page No.: 51-56
Published: Apr 30, 2000
Section: Article
DOI: https://doi.org/10.32508/stdj.v3i4.3555
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Huy Hoang, P., Khanh Dien, L., & Tuan Kiet, N. (2000). DETERMINATION OF CAM PROFILE’S EQUATION. Science and Technology Development Journal, 3(4), 51-56. https://doi.org/https://doi.org/10.32508/stdj.v3i4.3555
Download Citation
Cited by
Article Statistics
HTML = 603 times
Download PDF = 358 times
Total = 358 times
Download PDF = 358 times
Total = 358 times
Most read articles by the same author(s)
- Pham Huy Hoang, SOME METHODS FOR KINEMATICS ANALYSIS OF THE MANIPULATORS , Science and Technology Development Journal: Vol 3 No 2 (2000)
- Nguyen Tuan Kiet, Le Khanh Dien, Pham Huy Hoang, DETERMINATION OF THE RELATIVE MOTION OF CUTTING TOOL IN MANUFACTURING THE GIVEN COMPLICATED PROFILE MECHANICAL DETAIL IN THE BASE OF FORMAL CREATION THEORY , Science and Technology Development Journal: Vol 3 No 4 (2000)
