Open Access 
Downloads
Download data is not yet available.
Abstract
The paper introduces the simply structured, inexpensive, easily controlled robot with off-line programming that is suitable to the automatic ability of factories in our country at the present, specially that of the factories producing plastic products.
Author's Affiliation
Article Details
Issue: Vol 3 No 4 (2000)
Page No.: 57-63
Published: Apr 30, 2000
Section: Article
DOI: https://doi.org/10.32508/stdj.v3i4.3556
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Van Nghin, D., Hieu Giang, L., Hong Sam, L., Anh Huy, V., & Thu Ha, T. (2000). MECHATRONICS ASPECT DESIGN OF THREE- COORDINATE MANIPULATOR. Science and Technology Development Journal, 3(4), 57-63. https://doi.org/https://doi.org/10.32508/stdj.v3i4.3556
Download Citation
Cited by
Article Statistics
HTML = 532 times
Download PDF = 214 times
Total = 214 times
Download PDF = 214 times
Total = 214 times
Most read articles by the same author(s)
- Ngo Kieu Nhi, Dang Van Nghin, Tran Huu Tam, DIGITAL ANTHROPOID MACHINE MEASURING 3D , Science and Technology Development Journal: Vol 3 No 4 (2000)
- Tran Huu Tam, Ngo Kieu Nhi, Dang Van Nghin, THE APPLICATION OF RADIAL BASIS FUNCTION NETWORK FOR USING SIGNAL PROCESSING OF GEOMETRIC DIMENSION MEASUREMENT , Science and Technology Development Journal: Vol 3 No 9&10 (2000)
- Tran Canh Dung, Chu Quoc Thang, Dang Van Nghin, FORM FINDING PRETENSION MEMBRANE STRUCTURES BY UNCOMPRESSED TRUSS SYSTEM , Science and Technology Development Journal: Vol 2 No 2&3 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, APPLY LOCARTI METHOD TO DEFINE THE FATIGUE LIMITATION QUICKLY OF THE BURNISHED PARTS , Science and Technology Development Journal: Vol 2 No 11&12 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, SURFACE QUALITY IN PROCESSES THREE - BALL BURNISHING , Science and Technology Development Journal: Vol 1 No 4 (1998)
- Thai Thi Thu Ha, Mai Duy Nam, THE MULTI- TARGETED OPTIMIZATION OF VIBRATIONAL BURNISHING PROCESS ON CYLINDER LINER , Science and Technology Development Journal: Vol 1 No 9&10 (1998)
