Article Open Access Logo

UPGRADING THE WEAR RESISTANCE OF SLIDING GUIDES OF ENGINE LATHE BY INDUCTION HARDENING (HIGH - FREQUENCY ALTERNATING CURRENT)

Dao Khanh Du 1
Nguyen Van Them 2
Volume & Issue: Vol. 2 No. 9 (1999) | Page No.: 50-55 | DOI: 10.32508/stdj.v2i9.3679
Published: 1999-09-30

Online metrics


Statistics from the website

  • Abstract Views: 1669
  • Galley Views: 647

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

This article describes apparatus for the induction hardening and apparatus for the test of the wear resistance of sliding guides. The test result on the apparatus high effect by induction hardening.

Comments