Open Access 
Downloads
Download data is not yet available.
Abstract
The article recommending the experimental researching results to improve the surface quality by 3-ball burnishing intrument.
Author's Affiliation
Article Details
Issue: Vol 1 No 4 (1998)
Page No.: 17-21
Published: Apr 30, 1998
Section: Article
DOI: https://doi.org/10.32508/stdj.v1i4.3719
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Thanh Phong, N., Van Nghin, D., & Quoc Thang, C. (1998). SURFACE QUALITY IN PROCESSES THREE - BALL BURNISHING. Science and Technology Development Journal, 1(4), 17-21. https://doi.org/https://doi.org/10.32508/stdj.v1i4.3719
Download Citation
Cited by
Article Statistics
HTML = 1033 times
Download PDF = 314 times
Total = 314 times
Download PDF = 314 times
Total = 314 times
Most read articles by the same author(s)
- Ngo Kieu Nhi, Dang Van Nghin, Tran Huu Tam, DIGITAL ANTHROPOID MACHINE MEASURING 3D , Science and Technology Development Journal: Vol 3 No 4 (2000)
- Dang Van Nghin, Le Hieu Giang, Luong Hong Sam, Vo Anh Huy, Thai Thi Thu Ha, MECHATRONICS ASPECT DESIGN OF THREE- COORDINATE MANIPULATOR , Science and Technology Development Journal: Vol 3 No 4 (2000)
- Tran Huu Tam, Ngo Kieu Nhi, Dang Van Nghin, THE APPLICATION OF RADIAL BASIS FUNCTION NETWORK FOR USING SIGNAL PROCESSING OF GEOMETRIC DIMENSION MEASUREMENT , Science and Technology Development Journal: Vol 3 No 9&10 (2000)
- Chu Quoc Thang, Tran Canh Dung, THE FORM FINDING OF TENSIONED MEMBRANE STRUCTURES , Science and Technology Development Journal: Vol 2 No 2&3 (1999)
- Tran Canh Dung, Chu Quoc Thang, Dang Van Nghin, FORM FINDING PRETENSION MEMBRANE STRUCTURES BY UNCOMPRESSED TRUSS SYSTEM , Science and Technology Development Journal: Vol 2 No 2&3 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, APPLY LOCARTI METHOD TO DEFINE THE FATIGUE LIMITATION QUICKLY OF THE BURNISHED PARTS , Science and Technology Development Journal: Vol 2 No 11&12 (1999)
