New adaptive droop control with combined line impedance estimation method for parallel inverters

Abstract

This paper presents a new load sharing control between paralleled three-phase inverters in an islanded-microgrid based on the line impedance estimation online by the use of the Kalman filter. We can solve the mismatch of power sharing when the line impedance changes due to the temperature and frequency, significant differences of line parameters and requirements of Plug-and-Play mode of inverters connected to the microgrid. Moreover, the paper also presents a new Droop control method working with the line impedance which is different from the Droop traditional algorithm when the line impedance is assumed pure resistance R or pure inductance X. In the paper, the line impedance estimation for parallel inverters uses the least squares method combined with Kalman filter. In addition, secondary control loops are designed to restore the voltage amplitude and frequency of the microgrid by using a combined nominal value SOGI-PLL with generalized integral block and phase lock loop to exactly monitor the voltage magnitude and frequency phase at common PCC. Control model has been simulated in Matlab/Simulink with three voltage source inverters connected in parallel for different ratios of the power sharing. The simulation results have shown the accuracy of the proposed control method. Therefore, the proposed adaptive droop control method based on line impedance estimation can be an alternative one for load sharing control in islanded microgrids.