Open Access 
Downloads
Download data is not yet available.
Abstract
The paper presents structure, principle of operation, analyzing factor causing errors of measuring coordinate machine, which is doing research and manfacturing. The paper presents one method appraising and sudduing system errors of machine.
Author's Affiliation
Article Details
Issue: Vol 3 No 4 (2000)
Page No.: 37-45
Published: Apr 30, 2000
Section: Article
DOI: https://doi.org/10.32508/stdj.v3i4.3553
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Kieu Nhi, N., Van Nghin, D., & Huu Tam, T. (2000). DIGITAL ANTHROPOID MACHINE MEASURING 3D. Science and Technology Development Journal, 3(4), 37-45. https://doi.org/https://doi.org/10.32508/stdj.v3i4.3553
Download Citation
Cited by
Article Statistics
HTML = 641 times
Download PDF = 275 times
Total = 275 times
Download PDF = 275 times
Total = 275 times
Most read articles by the same author(s)
- Dang Van Nghin, Le Hieu Giang, Luong Hong Sam, Vo Anh Huy, Thai Thi Thu Ha, MECHATRONICS ASPECT DESIGN OF THREE- COORDINATE MANIPULATOR , Science and Technology Development Journal: Vol 3 No 4 (2000)
- Ngo Kieu Nhi, Pham Tuong Hoi, THE MAKING OF PIESOMETRE AND PRESSUREMETRE BY USING OF STRAIN GAUGE FOR MODEL TESTS , Science and Technology Development Journal: Vol 3 No 7&8 (2000)
- Tran Huu Tam, Ngo Kieu Nhi, Dang Van Nghin, THE APPLICATION OF RADIAL BASIS FUNCTION NETWORK FOR USING SIGNAL PROCESSING OF GEOMETRIC DIMENSION MEASUREMENT , Science and Technology Development Journal: Vol 3 No 9&10 (2000)
- Tran Canh Dung, Chu Quoc Thang, Dang Van Nghin, FORM FINDING PRETENSION MEMBRANE STRUCTURES BY UNCOMPRESSED TRUSS SYSTEM , Science and Technology Development Journal: Vol 2 No 2&3 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, APPLY LOCARTI METHOD TO DEFINE THE FATIGUE LIMITATION QUICKLY OF THE BURNISHED PARTS , Science and Technology Development Journal: Vol 2 No 11&12 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, SURFACE QUALITY IN PROCESSES THREE - BALL BURNISHING , Science and Technology Development Journal: Vol 1 No 4 (1998)
