Open Access 
Downloads
Download data is not yet available.
Abstract
The Initial form finding is one of the most important things in modeling and computing the pretension membrane structures. In this paper, the form finding will be performed based on a model in which the membrane is considered as an uncompressed truss system. The equilibrium equations at nodes will be etablished by using the force density method. Owning to that, the form finding is easier and more efficient.
Author's Affiliation
Article Details
Issue: Vol 2 No 2&3 (1999)
Page No.: 36-44
Published: Mar 31, 1999
Section: Article
DOI: https://doi.org/10.32508/stdj.v2i2&3.3615
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Canh Dung, T., Quoc Thang, C., & Van Nghin, D. (1999). FORM FINDING PRETENSION MEMBRANE STRUCTURES BY UNCOMPRESSED TRUSS SYSTEM. Journal of Science and Technology Development, 2(2&3), 36-44. https://doi.org/https://doi.org/10.32508/stdj.v2i2&3.3615
Download Citation
Cited by
Article Statistics
HTML = 1242 times
Download PDF = 475 times
Total = 475 times
Download PDF = 475 times
Total = 475 times
Most read articles by the same author(s)
- Ngo Kieu Nhi, Dang Van Nghin, Tran Huu Tam, DIGITAL ANTHROPOID MACHINE MEASURING 3D , Journal of Science and Technology Development: Vol 3 No 4 (2000)
- Dang Van Nghin, Le Hieu Giang, Luong Hong Sam, Vo Anh Huy, Thai Thi Thu Ha, MECHATRONICS ASPECT DESIGN OF THREE- COORDINATE MANIPULATOR , Journal of Science and Technology Development: Vol 3 No 4 (2000)
- Tran Huu Tam, Ngo Kieu Nhi, Dang Van Nghin, THE APPLICATION OF RADIAL BASIS FUNCTION NETWORK FOR USING SIGNAL PROCESSING OF GEOMETRIC DIMENSION MEASUREMENT , Journal of Science and Technology Development: Vol 3 No 9&10 (2000)
- Chu Quoc Thang, Tran Canh Dung, THE FORM FINDING OF TENSIONED MEMBRANE STRUCTURES , Journal of Science and Technology Development: Vol 2 No 2&3 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, APPLY LOCARTI METHOD TO DEFINE THE FATIGUE LIMITATION QUICKLY OF THE BURNISHED PARTS , Journal of Science and Technology Development: Vol 2 No 11&12 (1999)
- Nguyen Thanh Phong, Dang Van Nghin, Chu Quoc Thang, SURFACE QUALITY IN PROCESSES THREE - BALL BURNISHING , Journal of Science and Technology Development: Vol 1 No 4 (1998)
