Open Access

Downloads

Download data is not yet available.

Abstract

In this study, PP/TiO2 – nano Ag composite were successfully prepared by melt mixing method. The composites TiO2 – nano Ag and PP/TiO2 – nano Ag with different silver content were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Xray diffraction (XRD) and IR spectrum to investigate their morphology and chemical compositions. It was found that the silver nanoparticles in TiO2 matrix were uniformly distributed and strongly attached to the polypropylene matrix and the average particle size of TiO2 – nano Ag was from 30 to 60 nm. As the result, the antibacterial property was obtained via microorganism test by showing the elimination of more than 99 % of E. coli bacteria. And UV protection behavior was also observed by UV-Vis characterization. In the other hand, the mechanical properties of polypropyleneTiO2-nano Ag composite were noticeably improved as compared to the neat polypropylene.



Author's Affiliation
Article Details

Issue: Vol 18 No 1 (2015)
Page No.: 70-80
Published: Mar 31, 2015
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v18i1.1036

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Huynh, L., Huynh, C., Ha, N., Lam, V., & Le, H. (2015). Synthesis and study on mechanical properties of the polypropylene/TiO2 - nano Ag composite for antibacterial application. Science and Technology Development Journal, 18(1), 70-80. https://doi.org/https://doi.org/10.32508/stdj.v18i1.1036

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 2389 times
Download PDF   = 2440 times
Total   = 2440 times

Most read articles by the same author(s)

<< < 1 2