Engineering and Technology - Research article Open Access Logo

The model to predict sand production for production wells at Cuu Long basin

Dung Quoc Ta 1, *
Tung Thanh Hoang 2
  1. University of Technology, VNU-HCM
  2. Petrovietnam Drilling & Well Services Corporation (PV Drilling)
Correspondence to: Dung Quoc Ta, University of Technology, VNU-HCM. Email: pvphuc@vnuhcm.edu.vn.
Volume & Issue: Vol. 17 No. 3 (2014) | Page No.: 172-178 | DOI: 10.32508/stdj.v17i3.1493
Published: 2014-09-30

Online metrics


Statistics from the website

  • Abstract Views: 2490
  • Galley Views: 1043

Statistics from Dimensions

Copyright The Author(s) 2023. This article is published with open access by Vietnam National University, Ho Chi Minh city, Vietnam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. 

Abstract

Sand production in Sandstone reservoirs is a complex problem to Oil & Gas companies. Many methods have used to solve this problem but these methods only have effect for the first period of production without effective in long time. Sand production causes big damages such as: producing tools corrosion in hole, separating tools corrosion at surface, formation collapse, so sand production in well is always the urgent problem. Based on formation characteristic research, advantages and disadvantages of sand failure analysis and combining the advanced methods, this study introduces Production Sand Pressure Model to predict sand productivity in sedimentary reservoirs in field X in Cuu Long basin.

Comments