Open Access  

Downloads

Download data is not yet available.

Abstract

In this work, we developed a Fortran code (CalcTotEff) to calculate the intrinsic and total efficiencies of a 3 in x 3 in NaI(Tl) crystal by using the hybrid Monte Carlo method. To confirm the reliability of the results of the total efficiency calculated, an experimental arrangement was set up. The results showed the compatibility between the calculated and experimental data. We also used the hybrid Monte Carlo method to evaluate the dependence of the intrinsic efficiency on d/R ratio (d is the distance from the surface detector to point source and R is the radius of NaI(Tl) crystal).

Author's Affiliation
Article Details

Issue: Vol 16 No 4 (2013)
Page No.: 26-34
Published: Dec 31, 2013
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v16i4.1593

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Hoang, T., Tran, T., & Chau, T. (2013). Evaluation of the total and intrinsic efficiencies of a 3 in x 3 in NaI(Tl) crystal by using the hybrid Monte Carlo method. Science and Technology Development Journal, 16(4), 26-34. https://doi.org/https://doi.org/10.32508/stdj.v16i4.1593


 Download Citation
 Cited by

Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1170 times
Download PDF   = 594 times
Total   = 594 times