Open Access 
Downloads
Download data is not yet available.
Abstract
Market demand is always changing over time especially for plastic products. Therefore it is necessary to create sample models in the meaning of single or small-batch production which is expected with short processing time, lower cost and operating simply but also meet the technical requirement. This paper presents a research of applying ISF process on PVC plastic sheet to manufacturing sample models and small-batch products. There is also a comparison of economic efficiency between ISF technology and traditional plastic forming methods.
Author's Affiliation
Article Details
Issue: Vol 15 No 1 (2012)
Page No.: 15-26
Published: Mar 30, 2012
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v15i1.1770
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Nguyen, N., Nguyen, N., Le, D., Nguyen, B., & Nguyen, T. (2012). RESEARCH OF APPLYING ISF TECHNOLOGY ON PVC PLASTIC SHEET TO MANUFACTURING SOME NORMAL PRODUCTS. Science and Technology Development Journal, 15(1), 15-26. https://doi.org/https://doi.org/10.32508/stdj.v15i1.1770
Download Citation
Cited by
Article Statistics
HTML = 1296 times
Download PDF = 604 times
Total = 604 times
Download PDF = 604 times
Total = 604 times
