Open Access

Downloads

Download data is not yet available.

Abstract

This paper presents the synthesis and characterization of Y3Fe5O12, Gd3Fe5O12 and Dy3Fe5O12 nanoparticles by sol-gel method using initial salts solution of Y(NO3)3, Gd(NO3)3, Dy(NO3)3, Fe(NO3). The lattice constant, crystallite size and particle morphology of these ferrite garnet nanoparticles were studied by using X-ray diffraction and transmission electron microscopy (TEM). The results showed that the garnet samples prepared by this method were formed at 800oC, which is lower than the sintering temperature for ceramic bulk samples (1400oC). The particle size is in the range 25- 40 nm as observed via TEM image and the average particle size was found to be 37nm using Debye- Scherrer formula.



Author's Affiliation
Article Details

Issue: Vol 15 No 2 (2012)
Page No.: 27-34
Published: Jun 30, 2012
Section: Natural Sciences - Research article
DOI: https://doi.org/10.32508/stdj.v15i2.1798

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Dao, N., Nguyen, D., & Than, H. (2012). PREPARATION AND STUDY OF FERRITE GARNET R3Fe5O12 (R=Y, Gd, Dy) NANOPARTICLES. Science and Technology Development Journal, 15(2), 27-34. https://doi.org/https://doi.org/10.32508/stdj.v15i2.1798

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 1280 times
Download PDF   = 945 times
Total   = 945 times