Open Access 
Downloads
Download data is not yet available.
Abstract
In the digital design process, surface modeling is required to be as accurate as possible for the effective support of production as well as for numerical performance analysis. This article reviews the geometric modeling techniques, based on non-uniform rational B-spline (NURBS). The NURBS surface can be readily translated into many CAD/CAM packages (Computer Aided Design/Computer Aided Manufacturing), which is more convenient for visualization performance and finite element methods.
Author's Affiliation
Article Details
Issue: Vol 14 No 4 (2011)
Page No.: 44-52
Published: Dec 30, 2011
Section: Engineering and Technology - Research article
DOI: https://doi.org/10.32508/stdj.v14i4.2006
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Le, H., Nguyen, H., & Vo, C. (2011). SURFACE MODELING FOR CAD/CAM BASED ON NURBS. Science and Technology Development Journal, 14(4), 44-52. https://doi.org/https://doi.org/10.32508/stdj.v14i4.2006
Download Citation
Cited by
Article Statistics
HTML = 1096 times
Download PDF = 549 times
Total = 549 times
Download PDF = 549 times
Total = 549 times
Most read articles by the same author(s)
- Thien Minh Doan, Khoi Nguyen Nguyen Tran, Tuan Dinh Le, Cang Trong Vo, Chung Quang Dinh, SHIP ASSEMBLY DESIGN BY 3D MODELING , Science and Technology Development Journal: Vol 14 No 4 (2011)
- Cang Trong Vo, Bich Ngoc Vu, Thien Minh Doan, Dung Anh Vo, APPLICATION OF COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEMS (CMMS) FOR SERVICE FLEET , Science and Technology Development Journal: Vol 14 No 4 (2011)
